| Db - Cup Backface Backing Diameter | 66.04 mm |
| db - Cone Backface Backing Diameter | 45.97 mm |
| D | 73.025 mm |
| R - Cone Backface To Clear Radius1 | 3.560 mm |
| Aa - Cage-Cone Backface Clearance | 1 mm |
| a - Effective Center Location3 | -8.1 mm |
| Da - Cup Frontface Backing Diameter | 69.10 mm |
| Cg - Geometry Factor | 0.0725 |
| C - Cup Width | 19.050 mm |
| Design Units | Imperial |
| Series | 2700 |
| Cage Type | Stamped Steel |
| G1 - Heat Generation Factor (Roller-Raceway) | 28.7 |
| r - Cup Backface To Clear Radius2 | 0.76 mm |
| e - ISO Factor8 | 0.3 |
| Cone Part Number | 2785 |
| C90 - Dynamic Radial Rating (90 million revolutions)4 | 5060 lbf |
| B - Cone Width | 25.654 mm |
| C1 - Dynamic Radial Rating (1 million revolutions)5 | 19500 lbf |
| B | 23.777 mm |
| HSR25A1UU(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | D1:119.1 mm; Long Description:65MM Bore; Shaft Mou; Calculation factor kr:0.05; UNSPSC:31171532; D:140 mm; Calculation factor - kr:0.05; internal clearance:C0; bore diameter:65 mm; D1 ≈:119.1 mm; Inner Race Width:1.89 Inch | 48 Milli; d1 ≈:86 mm; closure type:Open; static load capacity:3 |
| HSR25A1UUM(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | dh:112 mm; Bore Diameter (mm):80; r min.:0,6 mm; Outer Diameter (mm):120; Weight:0,74 Kg; Bearing number:CRBH 8016 A; d:80 mm; B:16 mm; Basic dynamic load rating (C):32,1 kN; Width (mm):16; Size (mm):80x120x16; ds:88 mm; D:120 mm; |
| HSR25A1M(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | Designation Ruville:7712; Bearing number:CX234; Designation FAG:713623030; Designation SKF:VKBA 3219; |
| HSR25A1SSM(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | D1:669,3 mm; Weight:711 Kg; Reference speed:320 r/min; Calculation factor (Y1):1,8; Fatigue load limit (Pu):990; Width (mm):280; D:790 mm; Basic dynamic load rating (C):7100 kN; Calculation factor (Y0):1,76; ba min.:17 mm; db min:469 mm; Dm:560 mm; Bearing number:23288-B-K-MB+H3288; B:280 mm; I:361 |
| HSR20R1UU(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | da min.:68,5 mm; Weight / LBS:1.757; Category:Angular Contact Ball; outside diameter:110 mm; Noun:Bearing; Flush Ground:No; d:60 mm; r1a max:1 mm; Static load, C0:44.5 kN; row type & fill slot:Single-Row Non-Fill; contact angle:40 °; Dynamic load, C:56 kN; UNSPSC:31171531; Cage Material:Steel; r |
| HSR25A1SS(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | C:170 mm; Size (mm):360x650x170; D:650 mm; Outer Diameter (mm):650; B:170 mm; Width (mm):170; Bearing number:NJ2272; d:360 mm; Bore Diameter (mm):360; |
| HSR20R1UUM(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | Ew:90 mm; d1:70,8 mm; B:25 mm; Bore Diameter (mm):55; Ba:22,2 mm; Weight:0,56 Kg; X:17 mm; Basic dynamic load rating (C):117 kN; Size (mm):55x90x25; Width (mm):25; Bearing number:RN2211-E-MPBX; d:55 mm; Outer Diameter (mm):90; Basic static load rating (C0):118 kN; r min.:1,5 mm; |
| HSR25A1(GK) THK Linear Guide (Block Only) Standard Grade Interchangeable HSR Series | r - Cup Frontface To Clear Radius2:0.03 in; d:3.1490 in; B - Cone Width:1.4212 in; db - Cone Backface Backing Diameter:3.74 in; Y1 - ISO Factor9:1.67; Ab - Cage-Cone Frontface Clearance:0.1 in; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:80900 lbf; Cone Part Number:578; Aa - Cage-Co |