| Design Units | Imperial |
| Cup Part Number | 384D |
| G1 - Heat Generation Factor (Roller-Raceway)11 | 42 |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4 | 42200 lbf |
| Cone Part Number | 385A |
| db - Cone Backface Backing Diameter | 2.4 in |
| Ab - Cage-Cone Frontface Clearance | 0.11 in |
| Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 3810 lbf |
| e - ISO Factor8 | 0.35 |
| R - Cone Backface To Clear Radius1 | 0.09 in |
| Aa - Cage-Cone Backface Clearance | 0.03 in |
| B - Cone Width | 0.8640 in |
| G2 - Heat Generation Factor (Rib-Roller End) | 15.7 |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3 | 6280 lbf |
| D | 3.9370 in |
| K - Factor7 | 1.65 |
| T - Bearing Width across Cones | 2.0624 in |
| Y2 - ISO Factor10 | 2.84 |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5 | 10900 lbf |
| d | 2 in |
| SRS7WNC1+[42-300/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | Size (mm):110x150x40; Bore Diameter (mm):110; Bearing number:NNU4922 V; D:150 mm; d:110 mm; Outer Diameter (mm):150; Width (mm):40; C:40 mm; B:40 mm; |
| SRS7WN+[42-300/1]LM THK Miniature Linear Guide Caged Ball SRS Series | C - Cup Width:0.8125 in; Cup Part Number:2320; Design Units:Imperial; r - Cup Backface To Clear Radius1:0.130 in; e - ISO Factor2:0.23; Cg - Geometry Factor:0.0517; Db - Cup Backface Backing Diameter:1.85 in; Y - ISO Factor3:2.59; Da - Cup Frontface Backing Diameter:2.11 in; Series:2300; D:2.2400 in |
| SRS7WN[SS,UU]+[42-300/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | C:50 mm; D:130 mm; Angle:5 °; Outer Diameter (mm):130; d:90 mm; R:115 mm; Bore Diameter (mm):90; Width (mm):60; Size (mm):90x130x60; Bearing number:GE 090 ES; B:60 mm; |
| SRS7WNC1+[42-300/1]LM THK Miniature Linear Guide Caged Ball SRS Series | B1:-; C0r:111; Basic static load rating (C0):111 kN; dd(min):-; ra(max):2; C:29 mm; Minimum Buy Quantity:N/A; D:120 mm; dc(min):-; Outer Diameter (mm):120; da(min):64; r1 min.:2 mm; db(min):-; d:55 mm; r(min):2; Fw:-; Product Group:B04144; db(max):-; rb(max):2; Weight:1.44 Kg; |
| SRS7WN[SS,UU]C1+[42-300/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | Da - Cup Frontface Backing Diameter:282.20 mm; R - Cone Backface To Clear Radius1:6.35 mm; C - Cup Width:63.500 mm; Db - Cup Backface Backing Diameter:275.08 mm; Cup Part Number:219122; Cg - Geometry Factor:0.129; Cage Type:Stamped Steel; G1 - Heat Generation Factor (Roller-Raceway):841; da - Cone F |
| SRS7WN[SS,UU]+[42-300/1]LM THK Miniature Linear Guide Caged Ball SRS Series | Cr:173; B:40 mm; db min:115 mm; Ew:-; Grease lub.:4000; Bearing No.:NNU4920K; ra max.:1 mm; (Refer.)Mass(kg):1.87; Basic dynamic load rating (C):139 kN; C:40 mm; da(min):106.5; Size (mm):100x140x40; r(min):1.1; da min.:106,5 mm; r min.:1,1 mm; d:100 mm; C0r:258; Bearing number:NNU4920K; Da(min):-; d |
| SRS7WS+[33-300/1]L[H,P]M THK Miniature Linear Guide Caged Ball SRS Series | Cr:330000 N; Da min:124 mm; D:160 mm; Y0:0,6; Size (mm):75x160x58; Ca min:7 mm; d:75 mm; Da max:148 mm; db min:87 mm; Bearing number:32315-B; rb max:2,5 mm; nG:4350 1/min / Limitin; e:0,55; C0r:470000 N / Static lo; C:45 mm; r1, 2 min:3 mm; da max:90 mm; Bore Diameter (mm):75; ra max:3 mm; Width (mm |
| SRS7WN[SS,UU]C1+[42-300/1]LM THK Miniature Linear Guide Caged Ball SRS Series | Designation SKF:VKBA 736; Bearing number:5315; Designation FAG:713644170; Designation SNR:R153.15; Designation SX:CX011; |