| L6-29P9ZD Rotek Slewing Ring Bearings | Bore Diameter (mm):30; D:72 mm; d:30 mm; Manufacturer Name:FYH BEARING UNITS; Product Group:M06110; C:20 mm; Weight:0,58 Kg; Thread (G):M8X1,00; Size (mm):30x72x42.9; C1:5,5 mm; Dynamic load rating radial (C):25,7 kN; S1:25,4 mm; Static load rating radial (C0):15,4 kN; Minimum Buy Quantity:N/A; Cate |
| L6-29P9Z Rotek Slewing Ring Bearings | Inch - Metric:Metric; Harmonized Tariff Code:8482.50.00.00; Weight:3,26 Kg; Bore:3.937 Inch | 100 Mil; Dc max:158 mm; Internal Clearance:C0-Medium; fillet radius:2 mm; series:N; Ew:160 mm; Nlim (grease):3,800 rpm; Characteristic cage frequency, FTF:0.43 Hz; Nlim (oil):4,500 rpm; ra max:2 mm; Max ope |
| A14-33N1 Rotek Slewing Ring Bearings | e - ISO Factor2:0.38; Y - ISO Factor3:1.6; Design Units:Imperial; Da - Cup Frontface Backing Diameter:8.50 in; D:8.7500 in; Series:L435000; C - Cup Width:0.7500 in; Cup Part Number:L435010; r - Cup Backface To Clear Radius1:0.06 in; Db - Cup Backface Backing Diameter:8.31 in; Cg - Geometry Factor:0. |
| L6-29N9ZD Rotek Slewing Ring Bearings | Outside Diameter D:160.000 mm; Oil Reference Speed:8200 rpm; Snap Ring Width f max:2.820 mm; Grease Reference Speed:5700 rpm; Cr - Dynamic Load Rating:118 kN; Weight:3.3 Kg; C0r - Static Load Rating:78.6 kN; Clearance:C0 (Normal); Radius Rs min:2.100 mm; Outside Ring Width B:37.000 mm; Snap Ring Dia |
| L6-29E9Z Rotek Slewing Ring Bearings | Calculation factor - kr:0.06; Contact Angle:30 Degree; Cage Material:Steel; da max.:68.5 mm; Inventory:0.0; ra max.:1.5 mm; Calculation factor - Y2:1.24; Flush Ground:No; Noun:Bearing; r1,2 min.:1.5 mm; d2:68.8 mm; UNSPSC:31171531; Maximum Capacity / Filling Slot:No; Product Group:B00152; Long Descr |
| L6-29E9ZD Rotek Slewing Ring Bearings | rb - max.:2.5 mm; Fatigue load limit - Pu:69.5 kN; Profile:Complete with Outer; Mass bearing:14.9 kg; finish/coating:Uncoated; Rolling Element:Cylindrical Roller B; r3,4 - min.:3 mm; s max.:3.7 mm; UNSPSC:31171547; rb max.:2.5 mm; precision rating:RBEC 1 (ISO Cla; static load capacity:620 kN; B |
| R8-30N3 Rotek Slewing Ring Bearings | Bearing number:ESPF201; Weight:0,2 Kg; D2:28,6 mm; Basic dynamic load rating (C):9,55 kN; Bore Diameter (mm):12; J1:63,5 mm; H:81 mm; s:6,5 mm; B1:28,6 mm; A:6,7 mm; J2:49 mm; N:7,1 mm; d:12 mm; A1:4 mm; |
| L6-29N9Z Rotek Slewing Ring Bearings | C0 - Static Radial Rating:264000 N; G2 - Heat Generation Factor (Rib-Roller End):41.1; B - Cone Width:32.000 mm; C90 - Dynamic Radial Rating (90 million revolutions)4:56300 N; C1 - Dynamic Radial Rating (1 million revolutions)5:217000 N; Cone Part Number:X32018XSA; Cage Type:Stamped Steel; D:140.000 |